• Please Select Your Region from the Map


Square Trays & No Jams



Available Options

  • High Speed Increases speed to maximum of 20 trays per minute. Please contact Lantech for details.
  • Communication Various communication configurations possible. Please contact Lantech for details.
  • Stainless Steel Frame or Components Please contact Lantech for details.
  • Exit Height Extension The exit height of the trays can be extended.
  • Custom Options Many options available for case types and dimensions, speeds, closing methods, machine frame and magazine, and machine performance data communications are available. Please contact Lantech Customer Support if your requirements are not satisfied by the options published on this page.
  • Beacon Colored lights indicate the status of the machine, blanks supply, and tape or hot melt supply.
  • Acoustic Signal An alarm sounds to indicate the presence of a fault condition.


  • Throughput Speed Up to 20 trays per minute
  • Tray Size Minimum (Outside Dimensions) 180 mm L x 100 mm W x 40 mm H (7 1/10" L x 4" W x 1 1/2" H)
  • Tray Size Maximum (Outside Dimensions) 260 mm L x 340 mm W x 200 mm H(10 1/4" L x 13 3/8" W x 7 7/8" H)
Tray Criteria
  • Tray Types Tray with Lid
  • Wave Types B, C, E Wave or combinations
  • Wall Types Single & double wall (test for multiple wall)
Tray Closure
  • Closing Method Refer to Manufacturer Manual
Service Requirements
  • Air Supply 6 Bar (80 psi)
  • Electric Service Req. US 230V, 3ph, 60Hz, Wye w/ Ground
  • Electric Service Req. EU 3L-PE-400V-50 Hz-Neutral
Machine Data
  • Magazine Infeed Capacity 280 blanks (approximate)
  • Weight 750 kg (1650 lbs)
  • Dimensions 2730 mm L x 1480 mm B x 1800 mm H (107 1/2" L x 58 1/4" W x 70 7/8" H)
  • Duration 3 years (unlimited cycles)

More Options Available, Contact Lantech